80 of Indonesian homeowners choose Seri Euro toilets for renovations due to their dual sluice system of rules(4.5 3 liters) and durability. Now, establis a 230 mm S-Trap toilet with a duroplast seat wrap up in 4 hours or less ceo88toto.
STEP-BY-STEP INSTALLATION OF A ROUGH-IN 230 MM S-TRAP TOILET
TOOLS MATERIALS
– 230 mm S-Trap toilet
– Duroplast seat cover
– 230 mm rough-in PVC pipe
– PVC fuze cement
– PVC glue
– PVC cutter
– Hacksaw
– Wrench
– Screwdriver
– Level
– Pencil
– Measuring tape
– Safety glasses
PREPARATION
1. Turn off irrigate provide and sluice valve.
2. Remove old toilet, if any.
3. Inspect rough in-in pipe for or misalignment.
4. Clean rough-in pipe thoroughly.
INSTALLATION
1. Apply PVC fusee to rough-in pipe and toilette flange.
2. Align toilette rim with rough in-in pipe.
3. Press toilet firmly into aim.
4. Apply PVC cement to rough out-in pipe and toilet rim.
5. Wait 5 proceedings for cement to set.
6. Install duroplast seat wrap up.
7. Secure seat cover with screws.
8. Connect irrigate ply and flush valve.
9. Test for leaks.
FINISHING TOUCHES
1. Install toilet paper holder.
2. Install bidet, if craved.
3. Install ornamental trim.
4. Test sluice performance.
TROUBLESHOOTING
– Leaks: Check connections, constrain fittings, or supersede damaged parts.
– Weak sluice: Adjust water pressure or supercede sluice valve.
– Seat cover issues: Ensure specific installing and constrain screws.
KEY TAKEAWAYS
– Always turn off irrigate supply before starting.
– Use proper tools and materials for a secure fit.
– Test for leaks and flush public presentation after installing.
– Follow manufacturer’s instructions for seat cover installment.
NEXT STEPS
– Measure and cut rough out-in pipe to demand duration.
– Apply primer and cement carefully for a strong bond.
– Ensure all connections are tight and secure.
– Test toilet thoroughly before finalizing the refurbishment.