How to keep your golf carts batteries Really serious, even dangerous threats can eventuate by improperly maintaining your golf cart’s batteries.
A lack of understanding about fundamental golf cart battery maintenance can lead to all sorts of issues. Some customers assume that the batteries that operate their golf carts are upkeep-free of charge. Even so, the crucial to attaining optimum performance and extended life is a solid golf cart battery upkeep plan.
It is advised that you get following equipment for use in golf cart battery care and maintenance:
A wrench distilled water a voltmeter (an instrument utilized for measuring the voltage involving two points in an electric circuit) a hydrometer (a tool applied to measure the specific gravity of the electrolyte answer) a post cleaner some baking soda petroleum jelly and possibly the most of all – goggles and gloves.
Generally wear protective clothing, acid proof gloves and goggles when handling lead acid batteries and take away all jewellery. used golf carts is significant to have lots of water and baking soda nearby as this will neutralise any acid spills from battery refilling and protect against further corrosive damage. Don’t forget, the electrolyte is a answer of acid and water, so skin make contact with ought to be avoided and, do not smoke close to batteries and never ever add acid to a battery.
Golf carts are generally powered by six lead-acid batteries mounted beneath the front seat.
First of all, examine the outside appearance of the batteries. You must appear for cracks in the container and the major of the battery. Posts and connections ought to be no cost of dirt, fluids and corrosion. You ought to replace any broken batteries.
Verify that all vent caps are tight. Then clean the battery top rated with a cloth or brush and a resolution of baking soda and water ensuring that any cleaning remedy or any other foreign matter does not get inside the battery. Then rinse with clean water and dry with a clean cloth. Solvents or spray cleaners really should not be used. Then clean the battery terminals and the inside of the cable clamps with a post and clamp cleaner. Reconnect the clamps to the terminals and thinly coat them with petroleum jelly. Normally preserve the region around the batteries clean and dry.
Water should really only be added soon after completely charging the battery. Prior to charging, there need to be enough water to cover the plates. If the battery has been discharged (partially or completely), the water level should be above the plates.
Some crucial points to remember are: Do not enable plates to be exposed to air and do not fill the water all the way up to the cap. Do not use water with a higher mineral content material. You need to use only distilled or deionised water.
Check water levels in each cell of every single battery weekly to make sure that the leaded plates in the battery are submerged in liquid. Never fill the cell all the way up — add just enough water to cover the plates.
Lastly, please stick to the manufacturer’s guidelines for maintaining batteries.